Steel tubular radiator
Steel tubular radiators
SL-DP- Model
- SL-DP12-1500 × 81500 mm height · 2 tubes · 8 sections · 380 mm · White RAL 9016
- Output at ΔT 50
- 835 W
- Output at ΔT 70
- 1296 W
- Availability
- In stock, 5–10 days
5-year warranty · Delivery across Georgia · Card and bank transfer
How a tubular radiator is built
SL-DP is a steel tubular radiator built up from sections 45 mm wide. More sections mean more output and more width, which is why the price is quoted per section rather than per finished radiator.
Two depths: 2 tubes (70 mm) and 3 tubes (100 mm), heights from 300 to 2000 mm, and the tall models work as a vertical design radiator that takes up very little wall. A tubular radiator has no fins to collect dust, which is why it gets specified where hygiene matters. The unit is symmetrical: the pipework can come in from the left or the right, from the side or from below.
Specifications
What is inside and what it is made of
Every unit is pressure-tested at 1.5 MPa in the factory and ships with its test passport.
Passports and certificates- Heat exchanger
- Steel tube 1.5 mm, laser-welded
- Casing
- Steel, powder-coated RAL 9016 or RAL 9005
- Max. water temperature
- 115 °C
- Working pressure
- up to 1.0 MPa, tested at 1.5 MPa
- Connection
- G ½″ thread, side or bottom — the radiator is symmetrical
- Custom sizes
- Lengths, corners and curves made to order
- In the box
- Radiator, brackets, passport
Want it hidden in the floor?
NT-V in-floor convectors drop into a niche under the finished floor — only the grille shows.
from 725 ₾
View
Can't break into the screed?
NT-N floor-standing convectors sit under the window on a finished floor.
from 608 ₾
View